BBQKees EMS Gateway manual

Table of Contents

Table of Contents

EMS BUS WI-FI GATEWAY

EMS bus Wi-Fi Gateway
How does it work?
Connecting a Gateway
Connecting a Gateway S32 or S3 (Standard editions)
Connecting a Gateway E32 V2 (Ethernet + WiFi Edition V2)
Connecting a Gateway E32 (ESP32 Ethernet edition)
Connecting the Gateway to the boiler or heat pump side
Connecting the Gateway to specific boilers and heatpumps
Connecting the Gateway to your home network
Configuring MQTT
Observing EMS bus signal quality
Overview of all web interface settings EMS-ESP V3.4
Customization feature
Scheduler feature
Using the Telnet interface
Adding external temperature sensors
Updating or downgrading the Gateway firmware
Connecting multiple Gateways
EMS bus compatibility
Troubleshooting
Help I can’t access my Gateway or maybe I bricked it
Factory reset
Gateway hardware details
Powering a Gateway
EMS bus wiring
Using Gateway GPIO
Upgrade an ESP8266 Gateway with an ESP32

Home Assistant configuration

Configuration for Home Assistant (MQTT Discovery)

Domoticz configuration

Configuration for Domoticz

Other systems configuration

Configuration for other MQTT systems
Configuration for Loxone
Configuration for OpenHAB
Configuration for NodeRed
Configuration for ioBroker
Configuration for Grafana
Configuration for Prometheus
Configuration for Enapter
Modbus TCP
RESTful API

EMS INTERFACE BOARDS

EMS interface boards
Interface board V3.1
Interface board V3
Interface board V1
Interface board V0.9
How to connect the boards
Links to code for interfacing with the EMS bus

BBQKees EMS Gateway manual

Index

Index

© Copyright 2019, BBQKees Electronics.

Built with Sphinx using a theme provided by Read the Docs.