Description
The Gateway S3 KIT (Standard WiFi Edition V3 KIT) is a kit with the BBQKees EMS Gateway S3 including all options for a lower price.
Included in this kit are the following items (one each):
- EMS Gateway S3
- 12V DC power supply EU plug or 3 pin UK plug for UK orders (Sorry currently the UK power supplies are sold out, you’ll get a Euro one instead.)
- 10cm EMS service cable
- 100cm EMS screw terminal cable
- 3-lead JST ZH cable (for adding DS18B20 sensors)
- Wall mount bracket
- Very strong 3M double sided foam tape
With this kit you can connect the EMS Gateway to your boiler or heat pump in any situation.
- Via the EMS service jack on the boiler or heat pump (if it has one) by using only the 110cm EMS service cable.
- Via the EMS service jack on the boiler or heat pump (if it has one) by using the 110cm EMS service cable and the 12V DC power supply.
- Via the EMS screw terminal by using the 100cm EMS screw terminal cable and the 12V DC power supply.
With the supplied JST ZH cable you can add your own DS18B20 sensors to the Gateway. You can connect just one, or more in parallel.
The 3M double sided foam tape is strong enough to mount the Gateway vertically on a wall or plastic or metal surface (side of the boiler).
Jeroen (verified owner) –
Dennis (verified owner) –
Easy setup, integration into HomeAssistant after less than 15 min. Perfect.
Volker Lendle (verified owner) –
Super Produkt und einfache Anbindung an das Heizungssystem
Ivan (verified owner) –
Not only it connected mine Bosch Condens to Home Assistant. I also found mine wireless Thermostat CW100 on the same EMS bus. So now I am using EMS-ESP to adjust thermostat and to watch gas usage.
Sven (verified owner) –
Laurent X. (verified owner) –
Works as advertised. Biggest difficulty was to setup a MQTT user to work with Home assistant. But it’s manageable
BBQKees (store manager) –
Hi,
I now added to the instruction in the wiki the step to add a MQTT user before installing the MQTT integration in Home Assistant.
Indeed if you do not know about adding a user for MQTT you can spend hours trying to make it work.
Anonym (verified owner) –