Configuration for Home Assistant part two

Now that Home Assistant had found all the Gateway devices its time to add them to a view. You can do this mannually, or use the ui-lovelace.yaml configuration to add a preconfigured view to Home Assistant with most of the parameters and controls.

Adding the preconfigured view to Home Assistant

When copying all the YAML files from the repository, you also copied ui-lovelace.yaml to the config folder. If not, please do so now.

(Lovelace is the name of the default user interface of Home Assistant).

Open configuration.yaml and add:

# set Lovelace to YAML mode
lovelace:
  mode: yaml

Please follow the instruction from Home Assistant Lovelace YAML mode [1] as well so you don’t mess up your existing views! So add the existing view code to the ui_lovelace.yaml file.

When you are done, reboot Home Assistant.

You now should have a new view called ‘Heating’ that looks like this:

Home Assistant Heating interface.

Adding devices to the UI manually

If you want to build something yourself, click on the three dots on the top right and select ‘Configure UI’.

Home Assistant configure UI.

Now you can create a new view or add devices to an existing view.

We will create a new view called ‘EMS Gateway’. next click on ‘Save’:

Home Assistant add view.

Now click on the big orange plus icon on the bottom right to add devices to this view.

Home Assistant add to panel.

We will add a thermostat by selecting the thermostat.

Home Assistant add thermostat to view.

After that we add another sensor and the view will look like this:

Home Assistant 2 devices in view.