********************
Connecting a Gateway
********************

Items in the box
================

In the box of the Gateway you can find the following items:

- Gateway device
- 12V power supply (if ordered)
- 3,5mm jack cable (if ordered)
- 3-wire JST cable
- Green screw terminal
- Double sided tape (very strong once applied)

If you want to mount the Gateway to a surface, use the double sided tape.
Be careful, it is very strong once applied, and it can only be used once. It may damage wall paper when removed.

In general the order in which you should continue is as follows:

- Connect the Gateway to your boiler
- Connect the Gateway to your home network
- Update the firmware to the last (stable) release version
- Integrate the Gateway to your home automation

Now select your Gateway below.

Gateway models
==============

Depending on the model of Gateway you have, the connections are slightly different.
Pick your Gateway model from the list below:

Gateway model:

-  :ref:`Gateway S32 or S3<Connecting a Gateway S32 or S3 (Standard editions)>`.

-  :ref:`Gateway E32 V2 <Connecting a Gateway E32 V2 (Ethernet + WiFi Edition V2)>`.

-  :ref:`Gateway E32 V1 or V1.5 <Connecting a Gateway E32 (ESP32 Ethernet edition)>`.

For older models look at the archived wiki.