********************
Connecting a Gateway
********************

Items in the box
================

In the box of the Gateway you can find the following items:

- Gateway device
- 12V power supply (if ordered)
- 3,5mm jack cable
- 3-wire JST cable
- Green screw terminal
- White double sided tape (very strong)

If you want to mount the Gateway to a surface, use the white tape. It is very strong, it can only be used once.

In general the order in which you should continue is as follows:

- Connect the Gateway to your boiler
- Connect the Gateway to your home network
- Update the firmware to the last (stable) release version
- Integrate the Gateway to your home automation

Now select your Gateway below.

Gateway models
==============

Depending on the model of Gateway you have, the connections are slightly different.
Pick your Gateway model from the list below:

Gateway model:

-  :ref:`Gateway S32<Connecting a Gateway S32 (ESP32 Standard edition)>`.

-  :ref:`Gateway E32<Connecting a Gateway E32 (ESP32 Ethernet edition)>`.

-  :ref:`Gateway Premium II (P2)<Connecting a Gateway Premium II (P2)>`.

-  :ref:`Gateway Standard<Connecting a Gateway Standard or Regular>`.

-  :ref:`Gateway Regular<Connecting a Gateway Standard or Regular>`.

-  :ref:`Gateway Premium<Connecting a Gateway Standard or Regular>`.